Comprehensive Guide to TOME EV2002 Series Self-Adhesive Vinyl

Introducing the TOME EV2002 Series, a versatile “self-adhesive vinyl” designed for various applications, including public transportation systems, rail transit systems, and advertising displays. This product is ideal for smooth flat surfaces and slight curves, such as corrugated boards, PVC sheets, KT boards, acrylic, and exhibition boards. To achieve optimal results, it is crucial to follow the provided instructions for preparation and application.

Product Overview

The EJET® EV2002 series features a “permanent adhesive designed specifically for short-term advertising applications. With options available in both glossy and matte finishes, its robust adhesive quality ensures effective adherence to a variety of uneven substrates.

Removable adhesive vinyl is used for advertising in the subway(480_330-3)

Storage and Processing Conditions

For optimal storage, the self-adhesive rolls should be stored either suspended (with end caps) or standing on end on roll blocks, never lying without end caps. The recommended storage conditions include a temperature range of 15°C (59℉) to 35°C (95℉) and a relative humidity of 20-65% RH. These conditions contribute to maintaining the product’s integrity during storage and processing.

Printing Guidelines

Handle the product with care, using cotton gloves to prevent surface damage or soiling. Check the surface quality before printing, and verify the print file with profiling. Different parameter settings for printers and selecting software (RIP) are required due to the product’s varying qualities. Maintain a printing environment with a temperature of 22±3°C and a relative humidity of 50±10% for optimal results.

Drying Process

After printing, allow freshly printed films to dry for at least 24 hours (lying or hanging) to ensure the evaporation of residual solvents. Plotting or laminating too early may affect the film’s functionality. Proper drying prevents shrinkage during the drying process.

Surface Preparation

Before application, thoroughly clean the surface to remove dirt, dust, or grease. Wet application is recommended to ensure closer adhesion of graphics to the surface. After application, use a squeegee to remove excess moisture for a seamless finish.

Product Information

  • Face Film: 100um White
  • Adhesive: High Tack Permanent
  • Liner: 140g Single PE-coated Kraft Silicone Paper
  • Ink Compatibility: Eco-solvent, Solvent

Technical Specification

Test Item

Test Result

Test Method


Glossy:73/ Matte:15

60°, Glass surface

Thickness with adhesive (Micron)



Tensile Strength MD (Mpa)



Tensile Strength CD (Mpa)



Elongation at Break MD (%)



Elongation at Break CD (%)



Shrink (mm)


70°C*48hrs Aluminum plate

Initial Adhesive (N/25mm)

≥12 (1200g)


20min Peel Strength (N/25mm)

≥14 (1400g)

PSTC-1 180°, Stainless Steel

24hrs Peel Strength (N/25mm)

≥17 (1700g)

PSTC-1 180°, Stainless Steel

Release Force (g/25mm)


180°, 300mm/min

*The above data is obtained based on our testing conditions and is for reference only. It does not carry any warranty. For specific warranty terms and details, please contact TOME sale team.


The EJET® EV2002 series stands out with robust adhesive properties, ensuring reliable performance on uneven or rough surfaces. It exhibits excellent adhesion on Low Surface Energy (LSE) plastics, including Thermoplastic Polyolefin (TPO), Polypropylene (PP), and various Polyethylenes (e.g., HDPE).

Storage Conditions

Store the product horizontally in its original packaging, shielded from direct sunlight and heat sources. The recommended storage temperature and humidity are 15°C (59℉) to 35°C (95℉) and 20-65% RH, providing a shelf life of 6 months under these conditions.

Please note that this information is based on knowledge and experience, and customers are advised to conduct their own tests for special applications. No legally binding warranty of specific qualities can be derived from this information.

Advertising Material

TOME's Blog Category

Contact Us

Popular Category

Scroll to Top