Automotive adhesive vinyl Installation Method

Wet Paste Method (Highly Recommended):

Suitable for large or small format adhesive vinyl.
Tools: watering can, towel (or scraper, credit card)

  1. Clean the body and spray water mist evenly at the sticker position to reduce the stickiness of the sticker and make it easy to adjust the position.
  2. If possible, add a little dish soap to the watering can to further reduce the stickiness.
  3. Once you have decided on the position of the sticker, apply it slowly and gently smooth it with a towel or tool while removing the bottom paper.
  4. For small graphics, you can also peel off the stickers in their entirety, but be careful to avoid accidental sticking.
  5. When encountering a doorknob or scuff strip, cut the material and wrap it according to the situation.
  6. After adjusting the position, repeatedly and vigorously wipe off moisture and air bubbles.
  7. At the door and seam, use a utility knife to make a knife and wrap it inward. Or cut off excess material along the edge of the gap.
  8. Avoid detachment or protrusions between the sticker and the body.
  9. Try to let the moisture in the car sticker dry thoroughly, and heat and dry it moderately. If there is a transparent transfer sticker, the transfer sticker can be removed.
  10. Depending on the weather, wash your car after two or three days.
car-advertising-stickers

Dry Paste Method (Not Recommended):

Tools: Towel (or scraper, credit card)

  1. Clean the body and make sure it is dry.
  2. Once you have decided on the position of the sticker, apply it slowly and smooth it with a towel or tool while removing the liner paper.
  3. For small graphics, you can also peel off the stickers in their entirety, but be careful to avoid accidental sticking.
  4. After pasting, scrape and press several times repeatedly to ensure that all parts, especially the corners, are firmly glued.
  5. At the doors and seams, use a utility knife to wrap and fit inwards, or cut off excess material along the edges of the gaps.
  6. To avoid separation or protrusion between the sticker and the body, the sticker can be torn off if it has a transparent transfer sticker.

Note that even small stickers are prone to misalignment, so this method is not recommended and is for reference only.

Contact Us

Contact Us
*We Respect Your Confidentialty And All Information Are Protected
Scroll to Top